Victron Energy LYN060102010 Lynx Distributor (M10)

The Lynx Distributor combines a positive and a negative busbar in one modular enclosure. The positive busbar provides four fuse-protected outputs with LED fuse monitoring; the negative busbar provides four returns plus a ground. A front power LED and four fuse status LEDs simplify troubleshooting. When connected to a Lynx Smart BMS, up to four Lynx Distributors can report fuse status to the BMS (this function is not available with a Lynx Shunt VE.Can).

Stud & Interconnect Details

• Module interconnect (end busbar) studs: M10
• Internal fuse studs: M8 for standard MEGA/AMG fuses
• Recommended torque for M10 interconnects: 33 Nm

The Lynx Distribution System

The Lynx platform is a modular DC distribution ecosystem for clean, scalable installs. Combining connections, fusing, monitoring and lithium battery management. Components include:

• Lynx Power In – Positive/negative busbars with 4 connections for batteries or DC loads.
• Lynx Distributor – Positive/negative busbars with 4 fused outputs and LED fuse monitoring.
• Lynx Shunt VE.Can – Positive busbar with position for a main system fuse and a negative busbar with shunt for battery monitoring; VE.Can interface for GX devices.
• Lynx Smart BMS – For Victron Smart Lithium batteries, integrating a contactor on the positive busbar and a shunt on the negative; Bluetooth via VictronConnect and VE.Can for GX/VRM monitoring.

Specifications

• Voltage Range: 9–60 VDC
• Supported System Voltages: 12 / 24 / 48 V
• Reverse Polarity Protection: Yes
• Current Rating (busbars): 1000 A max
• Power Consumption: Up to 100 mA with all LEDs illuminated
• Busbar Connections (module interconnect): M10
• Internal Fuse Studs: M8 (MEGA/AMG fuses)
• Power/Data Lead: 40 cm RJ10 cable (included)
• Enclosure Material: ABS
• Dimensions (H × L × W): 11.4 × 6.7 × 3.2 in (290 × 170 × 80 mm)
• Weight: 4.85 lb (2.2 kg)
• Busbar Material: Tinned copper
• Operating Temperature: −40°F to +140°F (−40°C to +60°C)
• Protection Class: IP22