Victron Energy LYN060102000 Lynx Distributor (M8)

The Lynx Distributor contains a positive and a negative busbar. The positive busbar has four fuse protected connections with fuse monitoring. The negative busbar has four connections and a ground connection. It is part of the Lynx Distribution system. The Lynx Distributor has a power LED and four fuse status indication LEDs. If connected to a Lynx Smart BMS, up to 4 Lynx Distributors can send fuse status information to the Lynx Smart BMS. This feature is not available when connected to a Lynx Shunt VE.Can.

The Lynx Distribution System

The Lynx Distribution System is a modular busbar system that incorporates DC connections, distribution, fusing, battery monitoring and/or Lithium battery management. The Lynx Distribution System consist of the following parts:

• Lynx Power In - A positive and negative busbar with 4 connections for batteries or DC equipment.

• Lynx Distributor - A positive and negative busbar with 4 fused connections for batteries or DC equipment together with fuse monitoring.

• Lynx Shunt VE.Can - A positive busbar with a space for a main system fuse and a negative busbar with a shunt for battery monitoring. It has VE.Can communication for monitoring and setup with a GX device.

• Lynx Smart BMS - For use together with Victron Energy Smart Lithium batteries. It contains a positive busbar with a contactor that is driven by a battery management system (BMS) and a negative busbar with a shunt for battery monitoring. It has Bluetooth communication for monitoring and setup via the VictronConnect App and VE.Can communication for monitoring with a GX device and the VRM portal.

Specifications:

Voltage Range: 9-60Vdc

Supported System Voltages: 12, 24 or 48V

Reverse Polarity Protection: Yes 

Current Rating: 1000A Max

Power Consumption: Maximum 100mA (with all LEDs illuminated)

Busbar Connections: M8

Power and Data Connections: 40 cm RJ10 cable (included)

Enclosure Material: ABS

Enclosure Dimensions (H x L x W): 11.4 x 6.7 x 3.2 in (290 x 170 x 80 mm)

Unit Weight: 4.85 lbs (2.2 kg)

Busbar Material: Tinned copper

Operating Temperature Range: -40°F to +140°F (-40°C to +60°C)

Protection Class: IP22