The STARboost is a DC voltage booster for the Starlink Mini. It takes 10 to 28 V DC from a 12 V or 24 V battery or vehicle system and holds a regulated 30 V at up to 3 A on a 5.5 x 2.1 mm plug for the Mini's DC input. This version has a fused Anderson Powerpole input for battery boxes, distribution blocks and go-kits.
30 V Regulated output
90 W 3 A maximum
10 to 28 V DC input
Which STARboost?
| Model | Input connector | Inline fuse | Connects to |
| STARboost, Cigarette Plug | Cigarette lighter plug | 10 A, in the plug | 12 V or 24 V accessory socket |
| STARboost, Powerpole | Anderson Powerpole PP15-45 | 10 A, positive lead | Powerpole boxes and distribution blocks |
| STARboost, Ring Terminals | Two 5/16 in ring terminals | 10 A, positive lead | Battery, bus bar or fuse block studs |
The STARboost, Powerpole on this page is the one for a Powerpole power system: it plugs into a battery box or distribution block like any other Powerpole load. Only the input end differs.
Key specifications
| Input voltage | 10 to 28 V DC, for 12 V and 24 V systems |
|---|
| Output | 30 V DC regulated, up to 3 A (90 W) |
|---|
| Input connector | Anderson Powerpole PP15-45, mates with PP15, PP30 and PP45 |
|---|
| Input fuse | 10 A mini fuse, inline on the positive lead |
|---|
| Input lead | 12 in (305 mm) |
|---|
| Output plug | 5.5 x 2.1 mm DC coaxial plug |
|---|
| Output cable | 116 in (2.95 m) |
|---|
| Wire | 16 AWG |
|---|
| Protection | Overcurrent, short circuit, over-temperature |
|---|
| Enclosure | Potted and sealed, not rated for submersion |
|---|
| Size | About 3 x 3 x 1 in (76 x 76 x 25 mm) |
|---|
Why boost to 30 V?
The Starlink Mini reboots when its 12 V supply sags: a battery under load, a long or thin cable, a dip while the vehicle charges. The STARboost holds 30 V across its whole input range, whatever the battery does. At 30 V the same power takes 40% of the current it needs at 12 V, so the cable loses less.
Connecting it
Plug the Powerpole end into any PP15, PP30 or PP45 Powerpole outlet, red to red and black to black. The 10 A fuse sits in the positive lead between the booster and the connector; replace it only with another 10 A mini fuse.
Common questions
Does it work with the Starlink Mini 2?
No. The Mini 2 takes power over USB-C, not a DC barrel plug, so this plug does not fit it; use a USB-C PD source of 60 W or more.
Will it drain my battery?
It draws whenever the Mini is on; to protect a starting battery, add a DC timer or low-voltage disconnect.