Connects to any 12/24V DC input source via rear mounted F2 faston tab (blade type) connections. Ideal for all vehicles including: cars, buses, emergency vehicles, Sprinter Vans, RV's and Overland applications. Compatible with most mobile devices including Apple and Android products.
All black body with soft white illuminated LED lights for OEM installations that demand a clean and modern look
The QC4.0 USB Type-C is capable of high output wattages for charging smartphones, tablets, and even laptops. Higher input voltages allow the USB Type-C to output upwards of 60W.
Combination USB QC3.0 and USB Type-C QC4.0 fast device charger with support for multiple fast charging protocols including: Qualcomm QC4.0, Qualcomm QC3.0, Qualcomm QC2.0, Apple 2.4A, Samsung Adaptive Fast Charging (AFC), Huawei Fast Charging Protocol (FCP), Huawei SuperCharge Protocol (SCP), and PD3.0 PPS (27W/36W/48W/60W).
The included weather tight protective cover seals the USB's when not in use. Heavy duty environmental protective cover has a double seal to keep out unwanted moisture and debris. Raised texture grip enables easy removal of the cover.
|Operating Voltage||9-32V DC|
|Type-C USB PD3.0 Output||60W Max (5V/3A, 9V/3A, 15V/3A, 20V/3A)(PPS 5.0~5.9V/3A, PPS 3.3~20V/3A)|
|Type-A USB QC3.0 Output||18W Max (9V/2A, 6V/3A)|
|Total Output||78 Watts Peak Total Combined Power Output (75 Watts Nominal Total Combined Output)|
|Terminals||1/4" Nickel Plated Blades|
|Panel Mount Length||3.25 in (not including wiring or terminals)|
|Mounting||Fits 1-1/8" hole size|
|Operating Temperature Range||-13 to 140 °F (-25 to 60°C)|
|Over Voltage Protection||Yes|
|Over Current Protection||Yes|
|Over Temperature Protection||Yes|
|Short Circuit Protection||Yes|
|Reverse Polarity Protection||Yes|
|Includes||Protective dust cap cover and rear mounting/locking nut|
|Recommend Installation||Use IFH-18-02 inline blade fuse holder with 7.5A fuse on 12/24V input|
NOTE: Included dust cover does not work with PanelPlate1, PanelPlate2, PanelPlate3, PanelPlate4, PanelPlate4W, PanelPlate6, PanelPlateSB2, and PanelPlateSB3. The dust cover will need to be removed when using these mounting plates.