Filters
Search
Close

Software Downloads

Radio Programming Software

Choose the software linked below that matches your radio manufacturer and model number.

If you need help locating your radio model number, try removing the radio battery and look at the label on the back of the radio body. If your radio model is not available in the list above, please contact the radio dealer that the radio was purchased from for support.

Sorry Mac users, these radio manufacturers do not provide programming software for Macs. We have already suggested this many times.

USB Programming Cable Drivers

TERA DMR Contact CSV File

This downloadable Worldwide DMR Contact ID CSV file can be easily imported into the TERA DMR programming software. Once imported, your radio will display the call sign, name and DMR ID during receive if an ID match is found. This list is updated daily. Advanced users can filter and format contact details via a third party website.

TERA DMR Codeplugs

For TR-7400 (UHF)

For TR-7200 (VHF)

TERA DMR Firmware Update

What's new in version 3.1.16?

  • Supports up to 100,000 personal contacts, easily downloadable
  • Master radio volume can be adjusted from 1 to 10 (in case you find the maximum volume too loud)
  • Course and fine microphone gain adjustments
  • Receive only channel mode per channel
  • Talkaround mode per channel
  • Channel notify can announce the channel number from 1-16 (optional)
  • Ability to turn OFF the empty channel beep when a channel is not programmed
  • Fixed a bug with receive groups writing to the radio

Do I need to update my firmware?
TERA radios generally ship with the latest firmware version installed. You can determine your current TR-7400/TR-7200 firmware version by pressing the softkey on your radio under the menu icon, then selecting Settings then Radio Info and then Firmware Ver. If the version displayed is less than 3.1.16, please continue with the firmware update instructions below.

Backup your current codeplug
Updating the firmware on your TERA TR-7400/TR-7200 will not erase your radio's current programming. However, it's always a good idea to create a backup first. Using the programming software, read from your radio and then save this file.

Download the current firmware version
Download the TERA TR-7400/TR-7200 Firmware v3.1.16. Extract the two files located in this zip file to your desktop or a temporary folder.

Firmware update procedure

  • Install the updated TERA TR-7400/TR-7200 Programming Software v1.59 if you have not already done so
  • Connect the TERA PRG-70 programming cable to both your radio and computer
  • Turn your radio off
  • Hold both lower side buttons below the PTT button and turn your radio on
  • The screen will remain black. If you see the normal start screen, try holding the two side buttons harder and try again.
  • In the programming software, click on the Tools menu and select Software Update
  • Click Load and find the downloaded firmware .bin file from your desktop or temporary folder
  • At the bottom of the window click Update
  • When complete, you may close the Software Update window

Update codeplug files
To utilize the new features in the updated firmware, existing codeplug files should be updated as well. Open a saved codeplug file and write it to your radio. Next, read from the radio and save this updated file over the original. Repeat this step for any additional saved codeplug files.

Anytone DMR Contact CSV File

This downloadable Worldwide DMR Contact ID CSV file can be easily imported into the Anytone AT-D868UV programming software. Once imported, your radio will display the call sign, name, location and DMR ID during receive if an ID match is found. This list is updated daily. Advanced users can filter and format contact details via a third party website.

Anytone DMR Codeplugs

Anytone DMR Firmware Update

What's new in version 2.31?

  • In CPS -> Optional Setting -> Power-on, add the Default Startup Channel and zone, it will allow you choose a startup channel, every time when you power on the radio, you will be at the start up channel
  • Menu -> Settings -> Chan Set, add Select Contact, allow to choose a Contact and save the changes to channel
  • Allow create a new channel on radio or delete an existing channel. Operation as below:
    Create a new channel: Hold pressing MENU key, until the LCD display “Next Please Press Dial Key”, press P1 key, the radio will enter new channel setup.
    Delete an existing channel: Turn to the channel firstly, hold pressing MENU key, until the LCD display "Next Please Press Dial Key", press P2 key, the radio will allow deleting the channel.
  • Resolved issue when auto repeater is on, it turns off after power cycle
  • Resolved issue of using PF2 long press for scan
  • Resolved issue when in repeater mode, sometimes no RSSI and green light when release PTT
  • Added slot switch in key function
  • Added auto repeater range
  • Separate auto repeater setup for A and B channel
  • In radio Main Menu -> Call Log -> [4] Last Call, added 30 last call list
  • In CPS -> Digital -> Friends List, change the Repeater number to be Call Sign, also change the search to ignore case

What's new in version 2.29?

  • Display Last Heard when radio is transmitting
  • Last Heard when change the channel
  • Allow to apply Ranging function in a Private Call Channel
  • Correct the direction of ranging function
  • Add options for keypad lock
  • Increase the 5 Tone set ID to 7 digits
  • In friends list, add the search by Repeater Number (Call Sign)
  • Improve the PTT response speed when connect to Repeater

What's new in version 2.27?

  • Add Ranging Function
  • Add Friends List
  • Add Current Contact Display

Do I need to update my firmware?
Anytone radios generally ship with the latest firmware version installed. You can determine your current AT-D868UV firmware version by pressing the softkey on your radio under the menu icon, then selecting Settings then Device Info and then scroll down to Firmware Ver. If the version displayed is less than 2.31, please continue with the firmware update instructions below.

Backup your current codeplug
Updating the firmware on your Anytone AT- D868UV will erase your radio's current programming. To create a backup using the programming software, read from your radio and then save this file to your desktop or temporary folder.

Firmware update procedure

  • Install the updated Anytone AT-D868UV Programming Software v1.31 if you have not already done so
  • Install the Anytone AT-D868UV USB cable driver if you have not already done so. Select x86 for 32-bit systems, select x64 for 64-bit systems.
  • Download the Anytone AT-D868UV Firmware v2.31. Extract the files located in this zip file to your desktop or a temporary folder.
  • Run the QX Code Pro Update program extracted from the firmware zip file. We suggest you check the option to create a desktop shortcut link.
  • To prepare your radio for the new firmware, first, turn the radio off. Hold down the PTT and alarm key (top orange button) and at the same time, turn the radio on. The red LED should blink and you may release all buttons.
  • Connect the Anytone USB programming cable to both your radio and computer
  • Run the previously installed QX Code Pro Update program from the desktop shortcut
  • Click Open Update File. Navigate to your extracted firmware zip temporary folder and locate the file 868UV_1G_V2.31.spi.
  • Select your com port
  • Click Write to begin installing the latest firmware
  • Important: After the firmware is written successfully, you will need to initialize the radio.
  • Turn the radio off
  • Hold down the PTT and PF1 button and at the same time, turn the radio on.
  • The radio will display the message "Are you sure you want to Initialize radio?". Select Confirm (the green bar key). Please wait.
  • After the radio restarts, you will have the option to set the date and time. You may optionally set the date using the Up, Down and P1 keys. When GPS is enabled, it will display the correct time and date automatically.

Update codeplug files
To utilize the new features in the updated firmware, existing codeplug files should be updated as well. Open a saved codeplug file and write it to your radio. Next, read from the radio and save this updated file over the original. Repeat this step for any additional saved codeplug files.