Egis 8710-1500B XD Series Single Remote Battery Switch w/ Knob, Tinned Wires (Bulk)

The Egis 8710-1500B is a single-circuit XD Series bi-stable contactor configured as a remote battery switch. It combines high current capability with a small footprint, front-facing manual override knob, and tinned control leads for reliable marine/vehicle installations. Flexible dip-switch logic and remote inputs enable simple ON/OFF control or voltage-sensing behavior, while on-board and remote LEDs provide clear status. Its sealed housing, stainless hardware, and ultra-low standby draw make it a robust upgrade or drop-in alternative to legacy remote switches (wire-for-wire compatible with Blue Sea ML). Supplied as bulk pack.

• Series: XD Series bi-stable relay/contact switch.
• Configuration: Single circuit, remote battery switch with manual knob.
• Input Voltage Range: 8–36 V DC (auto-ranging; 12/24 V nominal).
• Continuous Current Rating: Up to 500 A (with dual 4/0 AWG cabling).
• Typical Ratings (by cable): 2/0 AWG—225 A continuous; 4/0 AWG—300 A; dual 4/0 AWG—500 A.
• Cranking/Surge: Up to ~1500 A (short duration).
• Control/Status: Remote ON/OFF/Auto inputs; local & remote LED indicators.
• Standby Draw: ~1.3 mA (industry-low, off-state).
• Protection/Sealing: IP67 / IP6K9K sealed enclosure; integrated thermal protection.
• Operating Temperature: −40 °C to +105 °C.
• Hardware: Stainless-steel terminals; forward-facing studs; protective cover included.
• Compatibility: Wire-for-wire with Blue Sea ML solenoid/remote battery switch.
• Harness: Tinned control wires (bulk-pack variant).
• Footprint: 35–75% smaller than many alternatives.
• Warranty: 4-year limited (manufacturer).