Bioenno BLF-1209A 12V, 9Ah Lithium Iron Phosphate (LiFePO4) Battery, PVC

Please note that due to federal battery regulations, this item may only be shipped via Ground.

Please note that this battery should only be charged using a LiFePO4 compatible charger (at 14.6VDC). Not a charger for SLA batteries.

The Bioenno Power Lithium Iron Phosphate (LiFePO4) Battery Model BLF-1209A is a state of the art 12V 9Ah battery. The original Bioenno light weight battery represents the best balance between a battery so small and light weight it disappears in your pack and a battery powerful enough to run your portable equipment be it communications and radio or photography and lighting. With applications covering the spectrum between audio-visual to radios, this is the go to solution for on the go users. No EMI/RFI (Electromagnetic Interference/Radio-Frequency Interference) and is absolutely quiet. This unit has available a 110VAC/220 VAC AC-to-DC charger, that provides 2A with a DC Plug, sold separately.

Includes built-in PCM (protection circuit module) which provides internal cell balancing and management, protection from overcurrent, undervoltage (overdischarge), overvoltage and short circuiting, and has integrated charging circuitry.

Battery Specifications

Voltage: 12V
Capacity: 9 Ah
Case Type: PVC Pack
Charge Connector: DC Plug (5.5/2.1mm)
Discharge Connector: Anderson Powerpole (15/30/45A compatible)
Maximum Continuous Discharge Current: 12A (Make sure your load consumes less than 12A)
Maximum Peak Pulse Current: 24A (for 2 sec.)
Max Peak Power Delivered to Load at 12V: 288 Watts (12v x 24A = 288 Watts) (Make sure your load consumes less than 288 Watts Continuous)
Dimensions: 4.3 in. x 3.2 in. x 3.1 in. (107 mm x 81 mm x 77 mm)
Weight: 2.6 lbs. (1.2 kg.)
Manufactures Warranty: 2 Years

AC-to-DC Charger Specifications (sold separately)

Input Voltage: 110VAC/220 VAC
Output Voltage: 14.6VDC
Current: 2A
Connector: DC Plug (5.5/2.1mm)