Cart

Anytone AT-D890UV Digital DMR Dual-band Handheld Commercial Radio with GPS, APRS RX/TX, Bluetooth, USB-C Charging and Airband AM Receive

$299.99
Out of stock
SKU: AT-D890UV

New!

Anytone AT-D890UV Digital DMR Dual-band Handheld Commercial Radio with GPS, APRS RX/TX, Bluetooth, USB-C Charging and Airband AM Receive

VHF/UHF dual-band digital/analog handheld transceiver with GPS/APRS, Bluetooth, USB-C charging battery, and a multi-protocol platform designed for demanding field use. Adds airband AM receive (108-145 MHz), cross-band repeater (U-V), dual-receive options, and up to 14 hours of analog/digital voice recording. Read Full Description

$299.99

Availability: Out of stock

SKU: AT-D890UV

Be the first to review this product

VHF/UHF dual-band Digital/Analog Part 90 handheld transceiver with 1.77-inch color TFT display, Bluetooth, and GPS. The Anytone AT-D890UV builds on the D878 platform with airband AM receive, USB Type-C battery charging, enhanced audio tools, expanded dual-receive behavior (including V-U), cross-band repeater capability, and internal analog + digital recording up to 14 hours.

Airband AM Receive

Receive AM airband from 108-145 MHz (plus FM broadcast RX), in addition to standard VHF/UHF operation.

USB Type-C Charging Battery

Includes a 3100 mAh battery with USB-C charging built into the battery pack, so you can charge with a standard USB-C power source (desktop charger support remains).

Cross-Band Repeater

Supports U-V or V-U cross-band repeater operation (analog, and cross-mode configurations depending on setup).

Dual Receive Options

Enhanced dual receive supports U-V or V-U combinations, including analog-analog and digital-analog dual receive modes.

14 Hours of Internal Recording

Built-in analog and digital voice recording up to 14 hours for replay on-radio or via software tools.

Enhanced Audio and Privacy Tools

Adds features commonly used to improve intelligibility and consistency in real-world noise: Companding, MIC AGC, DRC, NR, Analog Scrambler

Satellite Communication Support

Includes a satellite function that can predict satellite pass times (with satellite data loaded via CPS) for satellite communication workflows.

MDC1200 Transceiver

Supports MDC1200 signaling commonly used in analog systems for features like PTT ID (ANI) and related unit-identification signaling.

Tech Specs

Frequency Range	RX AM 108-145 MHz RX FM (broadcast) 87.6-108 MHz RX/TX VHF 136-174 MHz RX/TX UHF 400-520 MHz
Digital Protocol	DMR (ETSI-TS102 361-1/-2)
Digital Vocoder	AMBE++
Power	VHF 7W / UHF 6W
Channels	4,000
Digital Contacts	500,000
APRS	Analog + DMR APRS RX/TX
GPS	Standard configuration
Bluetooth	Standard configuration (BLE support noted)
Display	1.77-inch color screen
Recording	Analog + Digital, up to 14 hours
Cross-Band Repeater	U-V or V-U supported
Dual Receive	U-V / V-U combinations supported
Battery	3100 mAh, USB Type-C charging
Programmable	FCC 47CFR90.203 requires the keypad locked in the shipping configuration. Software keypad unlocking and re-programming are available with the included USB Programming Cable.
Speaker Connection	2-pin style Kenwood/Wouxun type earphone and speaker mic connection for a variety of accessories.
Package Includes	Dual-band VHF/UHF handheld radio, 3100 mAh USB Type-C rechargeable battery, desktop charger, USB-C charging cable, AC to USB-C charging adapter, dual-band antenna, dual-band high-gain long antenna, wrist strap, belt clip, Bluetooth PTT button with strap, USB programming cable, free downloadable CPS software, and user manual.
NXDN	NXDN capability is expected to be enabled/expanded via a future firmware update (availability depends on Anytone firmware releases).
Certifications	FCC Equipment Authorization Pending: This device has not yet been authorized under FCC rules and is shown for informational/display purposes only. It is not being offered for sale or lease, and will not be sold or delivered to end users, until FCC authorization is obtained.