
1332-BK Anderson Power PP15 Powerpole Connector Contact, 16-20 GA, 15A, Loose Piece
- $0.23
- In Stock
- SKU: 1332
Customer Reviews
Initial experience -- with #20 wire By Powerwerx customer
First effort with #20 wire.
After reviewing several YouTube videos I assembled the correct bits.
I used the recommended crimper and easily got 2 perfect crimps. Getting the pins snapped into the plastic sheaths was an exercise in frustration only made possible by the insertion/removal tool.
The videos used #10 wire which made insertion look easy even without the tool.
If the Powerwerx site has good videos that cover how to use the insertion/removal tool I'll apologize and scurry under my rock.
The system is ubiquitous and well conceived so it should be worth it to go through the 'learning curve' with small wires.
After reviewing several YouTube videos I assembled the correct bits.
I used the recommended crimper and easily got 2 perfect crimps. Getting the pins snapped into the plastic sheaths was an exercise in frustration only made possible by the insertion/removal tool.
The videos used #10 wire which made insertion look easy even without the tool.
If the Powerwerx site has good videos that cover how to use the insertion/removal tool I'll apologize and scurry under my rock.
The system is ubiquitous and well conceived so it should be worth it to go through the 'learning curve' with small wires.
Was this review helpful? Yes No (3/2)
Best Price Online By Rustom
Powerpoles are a quick and easy way to make reliable electrical connectors, and Powerwerx has the best prices online. The only (minor) issue is that if you are new to Powerpoles, the documentation is a bit thin.
I wrote a pretty detailed tutorial on using Powerpoles, which you can find at the link below.
In response to the other review saying 15 amp contacts rattle (and they do), if you put a piece of heatshrink over the contact where it meets the wire, you can eliminate rattle while also providing strain relief at the joint.
I wrote a pretty detailed tutorial on using Powerpoles, which you can find at the link below.
In response to the other review saying 15 amp contacts rattle (and they do), if you put a piece of heatshrink over the contact where it meets the wire, you can eliminate rattle while also providing strain relief at the joint.
Was this review helpful? Yes No (11/0)
loose fit bugs me By Karl
These work great. My only beef is that they are kind of a loose fit inside the housings due to their small size. This does not affect their performance, but a connector that rattles in your hand doesn't inspire confidence. For probably 100% psychological reasons, I find myself using 30-amp crimps and reducer sleeves (or several folds of the wire) just to get the nice solid-feeling connection even with smaller wires.
Was this review helpful? Yes No (8/4)
Handy for PCB mounts and spares By Trooper,
After you standardize on PowerPoles, there will always be the updated projects, damaged cords, asset recovery of old gear, ect . . . It's nice to have both 15 and 30A spares on hand, in addition to pins, so you can recycle your housings. The 15A contacts work great on PCB's as well - Just use solid wire to make the custom angle or routing you need. Pin the center of the connector to the board with the same wire, and you're set.
trooper, N7CAV
trooper, N7CAV
Was this review helpful? Yes No (8/1)
Write a review of this product and share your opinion with others.




