Picture of 4 Position Power Distribution Block for 15/30/45A Powerpole Connectors
4 Position Power Distribution Block for 15/30/45A Powerpole Connectors
  • $24.99
  • In Stock
  • SKU: PD-4

4 Position Power Distribution Block for 15/30/45A Powerpole Connectors

Easy to use 4 position power distribution block for 15/30/45A Powerpole connectors. Innovative design allows each position to use a retention clip for secure operation. Thick copper bus bar construction. Mountable for permanent installations. Rated at 45A. Read Full Description
Availability: In Stock
GTIN: 840128900000
Easy to use 4 position power distribution block for 15/30/45 amp Powerpole connectors. Convenient for professional installations, at the home or in the field. Proudly designed and manufactured by Powerwerx in the USA.

Very Low Loss Design

Thick copper bus bar construction with heavy duty crimps provides negligible voltage loss and very low resistance, unlike competitor's products that use thin circuit boards traces with high voltage loss.

Retention Clips

New innovative design allows each Powerpole connection to use retention clips for secure operation. Prevents unintentional disconnection in any environment.

Mounting Holes

Mounting holes are provided for permanent, secure mounting on any installation.

Anderson Powerpole Connectors

Compatible and designed to work with your favorite Anderson Powerpole 15, 30 & 45 amp connectors.

High Current Capacity

Unique copper bus bar construction provides reliable, safe up to 45 amp continuous operation.

Clean Installations

Simple design allows all wires to run in a single direction for cleaner and trouble free installation.

Tech Specs

Connections4 Powerpole Connectors
CompatibilityMates with all 15, 30 & 45 amp Powerpole connectors
Maximum Voltage58VDC
Maximum Amperage45A (continuous)
Mountable0.18" diameter mounting holes. Fits #8 screw.
ConstructionRugged ABS plastic base. Sealed internal bus bars.
Dimensions2.33"W x 0.97"D x 1.32"H (59.2mm x 24.6mm x 33.5mm)
Weight0.09 lb (0.04 kg)
Customer Reviews
Alittle expensive but great By
Use this distribution panel in my shack for testing purposes Easy in-and-out connecting. Works great. Seems very well made but perhaps slightly over priced I think.

SM6VYM Johnnie
Was this review helpful? Yes No (4/5)
Mobile Installation By
Feeding one of these in my truck with Pos and Neg fused 8 gauge stranded.  Using the 45 amp PowerPoles which just fit 10 gauge.  Block feeds a 300 watt 2 meter amp, an FT-991A all mode radio, plus a Radar Detector. Works great, clean install.
Was this review helpful? Yes No (10/5)
Power Supply Mod by WØHB By
Wanted to add a Power Pole output connection to the back of my new Samlex 1223, using minimum cabinet modifications.  Attached the PD-4 with two small screws.  Connected one cable pair to the 12V output lugs, leaving three pairs for attaching radios.  "Voilà!"  Thanks Powerwerx.
Was this review helpful? Yes No (24/3)
Love it, but was confused at first By
Great size, very solid feeling. I was confused at first in terms of how my cables would it in and ALMOST started making new cables.

Your normal pre-made cables will work, but in a 2 by 2 configuration (I was was thinking a 1x4  top-down configuration at first)

Keep rotating your cable until they slide on the red and black Powerpoles.
Was this review helpful? Yes No (3/17)
Nice Design By
This is a nice practical design, with the bonus of being able to mount it.
Was this review helpful? Yes No (11/7)
Write a review of this product and share your opinion with others.
Not Good Needs That Special Something Average, Ordinary That's Good Stuff Perfect. It doesn't get any better
The most useful comments contain specific examples about:
  • How you use the product
  • Things that are great about it
  • Things that aren't so great about it