Search
Close
Picture of ATC Style Fuse Holder 10 GA with Ring Terminals and Powerpole Connectors
ATC Style Fuse Holder 10 GA with Ring Terminals and Powerpole Connectors
  • $14.99
  • In Stock
  • SKU: RGH-10

ATC Style Fuse Holder 10 GA with Ring Terminals and Powerpole Connectors

ATC Style 10 GA Fuse Holder with gold plated 1/4" Ring Terminals on one end and 45 amp Powerpole connectors on the other. Includes (2) ATC style 40 Amp fuses. Read Full Description
$14.99
Availability: In Stock
SKU: RGH-10
GTIN: 840128903742

Total Length: about 12 inches - roughly 9in on ring side and 3in on Powerpole side

Fuse holder zip ties may be separated for additional separation length.

Environmental & Legislation

WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.

Customer Reviews
This is a great looking cable By
I bought one of these and it's beautiful work, however the ring connectors are to small to fit the bolts on my batteries in my truck. The inline fuse holders is great, exactly what my Yaesu products require. I have not used the cable because to do so I would have to cut the ring connectors off. I'm hoping I can find smaller battery terminal bolts.
This product seriously needs to have the ring size optional. I need 5/16" minimum to fit my battery bolts. I also want heavier gauge wire, at least 8 gauge and 40 amp fuses. My intention is to run one big power cable from my battery to the interior of my truck to power several radios.
Was this review helpful? Yes No (25/2)
Perfect power supply upgrade By
Was able to shorten the leads from the Yaesu supplied cords to my FT-891 with this and the power adapter. Just swapped the 40 amp fuses for 25 amp ones.
Was this review helpful? Yes No (12/1)
good By
Good cable but wish the length was longer on the  pole connector and ring terminal side.
Was this review helpful? Yes No (9/1)
Awesome By
Easy and clean.

Uses to run power from car battery to cabin to power vhf/uhf radio. Flawless.

Wish they had a 75 amp powerpole version .
Was this review helpful? Yes No (5/2)
Excellent Quality By
This fuse holder is made from excellent quality components for long, reliable operation. I use this on a 30AHr battery to run a 2m mobile and/or a 200W 110V inverter to run my Mac Book for field operation.
Highly Recommended.
Was this review helpful? Yes No (70/10)
Write a review of this product and share your opinion with others.
Not Good Needs That Special Something Average, Ordinary That's Good Stuff Perfect. It doesn't get any better
The most useful comments contain specific examples about:
  • How you use the product
  • Things that are great about it
  • Things that aren't so great about it