Search
Close
Picture of Powerwerx 30 Amp Desktop DC Power Supply with Powerpole Connectors
Powerwerx 30 Amp Desktop DC Power Supply with Powerpole Connectors
  • $139.99
  • In Stock
  • SKU: SS-30DV

Powerwerx 30 Amp Desktop DC Power Supply with Powerpole Connectors

This small regulated switching power supply features 2 Powerpole outputs in front and 1/4" binding posts in rear. Machined metal front bezel with illuminated power switch. DC output voltage 14.1V at 25A continuous, 30A surge. Small 6x5x2.5" footprint. Read Full Description
$139.99
Availability: In Stock
SKU: SS-30DV
GTIN: 840128904237

The Powerwerx Switching Power Supply Model SS-30DV is designed to supply 25 Amps continuous and 30 Amps surge (up to 5 minutes) at 14.1 VDC. Loads can be connected to either the rear binding posts or the front Powerpole connectors. Any output may provide up to 30 Amps individually, and the total output is limited at 30 Amps.

Features

  • Front Connection: 2 sets of Powerpole connectors
  • Rear Connection: 1/4 inch binding posts that also accept banana plugs, 1/4 inch ring terminals or compression connections
  • Illuminated Power Switch

Specifications
Electrical specifications:

  • Input Range: 100-120 VAC or 200-240 VAC, 50/60Hz (Switchable) New!
  • Output Voltage: 14.1 VDC fixed
  • Output Amperage: 25 continuous, 30 surge
  • Internal Protection: Thermal, over current
  • Internal Input Fuse: 6.3 Amps at 115 VAC
  • Ripple Peak-to-Peak Max. <100mVpp
  • Noise Peak-to-Peak Max. <100mVpp
  • Operating temperature rating: 0 – 50 °C
  • Storage temperature: -20 – 85 °C

Physical dimensions and materials:

  • Weight: 3.0 lbs. (48 oz.)
  • Overall Dimensions: 6.1 x 5 x 2.5 in (154mm long, 127mm wide, 63mm tall)
  • Fan: Quiet internal cooling fan
  • Machined metal case front bezel

Certifications

  • Meets FCC CFR Title 47 Part 15 Subpart B: Class B, CISPR: 2005 ANSI C63.4: 2003
  • Meets CE/LVD (Low-Voltage Directive 2006/95/EC) standard
  • Meets EMC: EN 55022:206+A1: 2007, 2010, EN 61000-3-2:2006

Powerpole Configuration
The Powerpole connectors mounted on the front panel conform to the RACES/ARES standard orientation.

Input Voltage Selection
The power supply is set up for 230V AC input as shipped from the factory. For 115V AC applications, set the recessed 115/230 input select switch located on the rear of the power supply into the proper position. Positions are identified on the switch. Use a small screwdriver to slide the switch into position. No adjustment is necessary for either 50 or 60 Hz input.

Applications

  • Land mobile radio base stations
  • Communications systems
  • Security systems
  • Automotive & marine systems
  • OEM applications
  • Test equipment
  • Electronic displays
  • 12 Volt lighting systems
  • GPS receivers
  • DC computers

Package Contents

  • Power Supply
  • AC Power Cord, 4 ft.

Installation Instructions

  1. Unplug the power supply from the mains supply outlet.
  2. Select the correct input voltage (See Input Voltage Selection).
  3. Connect the power cable’s positive (red) wire to the positive terminal and connect the negative (black) wire to the negative terminal on the back of the power supply or use the Powerpole connectors mounted on the front panel.
  4. Plug the power cable into the power socket on the back of the radio.
  5. Plug the power supply into the mains supply outlet.

Turning the power supply on
Turn the power supply on by pressing the power switch to the 'ON' Position.

Turning the power supply off
Before you turn the power supply off, turn the radio off as described in the user documentation for the radio. Then turn the power supply off by pressing the power switch to the 'OFF' Position.

Cooling
The SS-30DV power supply is cooled by convection and forced air cooling (normal airflow around the power supply in combination with a temperature controlled fan to improve cooling at higher levels of use). The fan is activated by a sensor when the temperature rises above 70°C.

Warranty
The Powerwerx support policy is simple: we want you to be happy! If you have a problem, please feel free to contact us and we will do our best to get you up and running as soon as possible.

The SS-30DV has a three-year limited warranty. We will repair or replace (at our discretion) your SS-30DV if you encounter any problems within three years from the date of purchase. We reserve the right to charge a reasonable fee for repairing units with user-inflicted damage. It is your responsibility to ship the defective unit back to Powerwerx. We will pay for the return shipping back to you. We reserve the right to upgrade your equipment to an equivalent or better model

Customer Reviews
Good performance in a small package By
I ordered 3 of these,  2 of which are on 24/7 and they perform flawlessly. Going to order another probably in a few months for when I travel so I don't have to unhook anything at home. I have every  confidence that it will perform just as well.
Was this review helpful? Yes No (2/0)
Solid power and reliable By
I have used this power supply to take over the work from my power hungry Astron RS-50A and it has not missed a beat. I have even inadvertently plugged in equipment to test that was shorted somewhere inside and the protection circuit kicked in and protected everything before my dumb self even fully realized what was going on.

One minor thing with the fan "shuddering" when the device is sitting idle or drawing low current and not needing the fan and making a low noise as it shudders back and forth (barely) repeatedly at about ~3 times per second. Not even enough to nick a star off of it.

Overall, I am happy with the SS-30DV and will be buying another one in the near future for other projects.
Was this review helpful? Yes No (2/1)
Safe for HF Shack By
I ordered the SS30DV from Elecraft together with the K4D.  No noise experience.  Well built.
73 de Peter WA6LBY
Was this review helpful? Yes No (1/2)
Great power supple By
I run a 991A.  It is a quiet supple, quieter than my alinco DM-30T
Was this review helpful? Yes No (1/1)
Very Good Power Supply By
I've had this power supply for about 5 years now.  I've used it for my base station operation, though only on VHF/UHF.  I like the convenience of the PowerPole connections on the front of the cabinet, and that there are two connectors, not just one in the front and the others in the rear. I've never had issues with the DC power this supply delivers.  Other members of my club use this power supply, as well, and are quite happy with it.  The portability is a big plus, and light weight means I can pack it in a go-bag and not have to lug a huge power supply around with me.
Was this review helpful? Yes No (16/0)
RFI spikes By
I guess a lot of lucky folks reviewing this. I got one that has RF spikes on my bandscope at regular intervals, on 20, 40, and 80m. Quite RF noisy. My friend picked up a new rig and antenna and got this power supply also, he told me the RFI was pretty intense as well, and ended up switching it out. YMMV. Lots of folks here saying it's RF quite, but that was definitely NOT the case for at least 2 people, me and my fellow ham friend.
Was this review helpful? Yes No (35/8)
Check them By
I love these little power supplies. They are trouble free and quiet. I'm running two right now and have ordered a third. The only thing to be aware of is they ship set to 220 volts. If you don't pay attention you can end up running them at half power when they are plugged into 110 volt lines. Just check the switch on the back when you get it.
Was this review helpful? Yes No (18/5)
Review of Powerwerx By
This is not so much a review of the power supply ... Have two and both are great but a review of the company. The following are abbreviated portions an exchange between myself and Powerwerx ... Last month I called Powerwerx to place an order and I asked for a schematic to service it (I thought it was out of warranty). They asked me for the serial number and I gave it to them. They said, we delivered a batch of power supplies, that included that serial number to HRO and based on the date delivered to HRO, it is covered under the three year warranty. They said I would need the receipt. I could not find it and called HRO. They had it, made a copy and mailed it to me (found out later Cheryl, my YL, also a ham  had it). I mailed the power supply back to Powerwerx and in a week plus a day, got a new one back. That is GREAT service. Oh yes, my first one, about 6 years old now, has been flawless.
Was this review helpful? Yes No (21/5)
Beautiful Power Supply By
I really wanted a compact power supply for use camping.  I have an Astron SS-30M which I modified to take Anderson Power Poles (the stock wire connectors are terrible).  The Powerwerx SS-30DV is smaller and already has the APP connectors on the front plus studs in the back!  I am running my Icom IC-7300 off it in the shack now to test things out before we hit the campsites.  Working great!!!
Was this review helpful? Yes No (15/5)
First Switching PS , I've Owned By
this is the first time i have ever had or used a Switching Powersupply,
and i must say, it gets 5 stars... works great. and with the help of the Product Reviews on this page is what got me to order this .. Great Job
PowerWerx

Barry Fisher N8DAD
Was this review helpful? Yes No (12/8)
Small Package By
Great little power supply. No noise generated from the unit, and I operate
80m to 1296. Super quiet fan. Power a DC bus from the spade lugs on back.
Power a Pro III and a vhf preamp from power pole connection's on front. Took the place of large linear supply. Footprint much smaller.
Was this review helpful? Yes No (17/3)
Cool Running Supply no apparent RF noise By
I've been using this for quite a few years now and can only add how happy I am small, quiet and does barely get warm. Have taken portable also.

Looking at buying a second now to replace all my 12V Wallwarts in the shack.

Cliff VK2NP
Was this review helpful? Yes No (12/7)
Fantastic Power Supply By
If you are a fan of power poles and easy to use/operate equipment, this is the power supply for you. Basically a very small, compact 25A (30A surge) DC power supply with power poles right on the front panel. Great for accessories or portable applications. I'm using on my desk at work, I bring different radios in and they are powered up in seconds. I am very impressed with the quality of workmanship and the neat, easy to use design. I would highly recommend this to anyone who needs portability and a compact design.
Was this review helpful? Yes No (23/6)
This thing rocks! By
I have beat the heck out of this thing and it performs admirably. Even when putting a 50A battery tester on it, the current limiting does its job and cuts down the voltage. The small size is very convenient for travel and power poles on the front makes this the best supply in its class, if you ask me. Meters would be nice, but it's hard to complain!
Was this review helpful? Yes No (20/4)
Great supply and rugged also. By
I use this supply at home and with my portable station. As I camp and operate radios over several days I have found this supply to be compact, noisefree, and reliable.

At home it powers a 100 watt HF radio and a 50 watt dual band FM with no issues.

In portable use it works in conjunction with your 40 amp powergate charger and a 100 amp gel cell to power a 100 watt HF radio.

Your products are sturdy and all seem to plug n play together. Thak you

Mike n6kzb/xe2
Was this review helpful? Yes No (27/6)
No HF et. al. Interference By
Got this for portable use because of its relatively small size and light weight compared to the Yaesu FP-1030A. Using this supply, listened across all frequencies on all ham bands 160m to 2 m and 70 cm on a Yaesu FT-897D finding NO noise or interference of any kind from this switching power supply. Then, transmitting at 100 watts on 80, 40, 20, 15, 10, 2 meters and 70 cm, got clean signal reports on audio.
Was this review helpful? Yes No (52/5)
Great Regulation - Runs Cool By
I purchased the SS30DV power supply specifically for my ADTV project. Running class A amplifiers require very good power regulation to maintain close bias tolerances.  The SS30DV came well packaged and even the poly bag was folded meticulously.  I connected the power supply to a load of 250W 12V lamps. The no load voltage was 13.86V and I ran the power supply with the 20A load for 3 hours.  With the full 20A load the output voltage was 13.78V.  The exhaust fan air temperature was 105F degs.  This power supply will serve the TV transmitter nicely.
See the test at: http://wa6rzw.homelinux.net/addon/adtv/adtv_4.php
Was this review helpful? Yes No (37/8)
Write a review of this product and share your opinion with others.
Not Good Needs That Special Something Average, Ordinary That's Good Stuff Perfect. It doesn't get any better
The most useful comments contain specific examples about:
  • How you use the product
  • Things that are great about it
  • Things that aren't so great about it